Approx. Packaging Dimensions (cm): 40 x 31.5 x 9  Weight (g): 850

Approx. Packaging Dimensions (cm): 31 x 19 x 8
Weight (g): 330

Approx. Packaging Dimensions (cm): 15 x 19 x 5
Weight (g): 115

Approx. Packaging Dimensions (cm): 31 x 20 x 13.5 Weight (g): 570

Approx. Packaging Dimensions (cm): 31 x 19 x 7.5
Weight (g): 375

Approx. Packaging Dimensions (cm): 30 x 19 x 5.5
Weight (g): 270

Approx. Packaging Dimensions (cm): 30 x 19 x 7
Weight (g): 305

Approx. Packaging Dimensions (cm): 31 x 19 x 8
Weight (g): 375

Approx. Packaging Dimensions (cm): 31 x 19 x 7.5
Weight (g): 315

Approx. Packaging Dimensions (cm): 31 x 20 x 9
Weight (g): 445

Approx. Packaging Dimensions (cm): 60 x 33 x 12
Weight (g): 1520

Approx. Packaging Dimensions (cm): 30 x 19 x 6
Weight (g): 285

Approx. Packaging Dimensions (cm): 30 x 19 x 7.5
Weight (g): 360

Approx. Packaging Dimensions (cm): 30 x 19 x 7
Weight (g): 850

Approx. Packaging Dimensions (cm): 63 x 41 x 13
Weight (g): 2550

■ Ganpra highest peak PG (perfect grade) appeared double o riser.

■ GN Drive is assembled and attached GN Drives of both shoulders are lit while the flywheel rotates inside.

■ Built-in newly designed clutch mechanism in GN condenser (shoulder · elbow · wrist · knee whole body 8), the large weapon keeps its arms firmly without lowering its arms.

■ Full refinement of the details of the internal skeleton with a new interpretation.

■ The mobility of the action pose is greatly improved by the leg swing mechanism.

■ Four additional weapons are included as new additional arms of O'Lighter.

■ Various weapons are full equipment molded parts × 58, foil seal × 1, Tetoron seal × 1, Gundam decal × 1, hologram sheet × 1, assembly manual × 1, GN drive (assembled and sample battery attached) × 2, Head LED × 1, head sample battery (LR 41) × 2

Approx. Packaging Dimensions (cm): 59 x 32 x 23
Weight (g): 5500

■ Full reproduction of "transformation" from unicorn mode to destroy mode including development of face guard.
■ Adopt special condensing resin for the red psycho-frame of the whole body.
■ The blade antenna that opens and closes at "Transformation" reproduces a single corner at unicorn mode by inserting a magnet. The inner surface exposed in Destroy mode is colored with gold.
■ Pursuing the extent of movement of the elbow and knee to the limit without damaging the impression of the appearance.
■ Beam · Magnum, as well as rich arms such as Hyper · Bazooka and Beam · Gatling Gun are included.
■ Beam · Gatling gun can be attached to arms in combination with shield.
■ Dedicated display base included. You can display abundant armed with MS. Fixing the MS on the pillar makes it possible to display a dynamic display unique to 1/60 scale.
■ Bannage · Links figures (standing / sitting) are included.
■ Plastic model original marking sticker included.
■ Psycho-frame emits UV light by incorporating an optional dedicated LED unit.
Molded item × 47, slide mark × 1, foil seal × 1, assembly instruction × 1

Approx. Packaging Approx. Packaging Dimensionss (cm): 59 x 40 x 17
Weight (g): 3550

●「PG 1/60 RX-0 ユニコーンガンダム」をUV発光させるLEDユニットのセット
●サイコフレーム用に29個、カメラアイ用に1個、合計30個のLEDを採用。LEDは各部位ごとにユニット化されており、MS本体に装着可能
●発光シークエンス(スイッチ操作による)
1：カメラアイが徐々に発光
2：サイコフレームが徐々に明るさを強めて発光
3：サイコフレームが徐々に消灯し、その後にカメラアイが消灯
●発光シークエンスのオートモードも搭載

●付属品LEDユニット、パーツセパレーター

( This is a machine translation. Please allow for possible misinterpretations in the text. )

● Set of LED units that will cause "PG 1/60 RX-0 Unicorn Gundam" to emit UV light
● 29 pieces for psycho frame and 1 piece for camera eye, totaling 30 LEDs are adopted. The LEDs are unitized for each part and can be mounted on the MS body
● Light-emitting sequence (by switch operation)
1: Camera eye gradually emits light
2: Psycho frame gradually increases brightness and emits light
3: Psycho frame gradually goes out, then camera eye goes off Also equipped with auto mode of luminescence sequence

● Accessory LED Unit, Parts Separator

Approx. Packaging Dimensions (cm): 60 x 40 x 28
Weight (g): 7000

●究極の`ストライクフリーダムガンダム`がカトキハジメ氏によるリファインで始動!!

●PG最大級のスケール感
最大の特徴であるスーパードラグーン展開状態においては、PG史上最大級のサイズとなる。
●ストライクフリーダムガンダムをディスプレイする為の専用ベースが付属
角度調整可能な専用ベースを使用する事により、ダイナミックなアクションポーズでの
ディスプレイが可能。
●最強の「ストライクフリーダムガンダム」を再現するための3大ポイント!!
ハイマットモード、フルバーストモード時に露出する内部骨格部は、エクストラフィニッシュ
加工による黄金の輝きを放ち、さらにその魅力を引き出すギミックを搭載。

・「スーパードラグーン射出展開ギミック」
スーパードラグーンをスライドさせると各機構がリンクしてスーパードラグーンが
射出位置に展開。
・「完全新規型の可動式内部骨格」
関節可動により黄金部位が拡張。スライド機構を組み込んだ外装と
PGストライクガンダムから更に進化した内部骨格により、エクストラフィニッシュ加工された
黄金部位が効果的に露出。
・「関節部に新機構を搭載」
腰部や脚部等、加重負担の掛かる機体各部に新機構を採用。関節保持力の向上により、
思いのままのポージングを楽しむ事が出来る。

●付属：ビームシールド、ビームライフル×2、ビームサーベル×2、
クスィフィアス3レール砲×2、スーパードラグーン×8、専用ベース(台座)

※LED用電池LR41 2個が別途必要となります。

● Ultimate `Strike Freedom Gundam` started with Refine by Mr. Katoki Hajime!
● PG largest scale feeling In the super-dragoon deployment state which is the maximum feature, it is the largest size in the history of PG.
● Dedicated base for displaying Strike Freedom Gundam is included By using an exclusive angle-adjustable base, you can use dynamic action poses Display is possible.
● Three major points for reproducing the strongest "Strike Freedom Gundam" !! The internal skeleton exposed in high mat mode and full burst mode is extra finish It emits golden glow by processing, and it also features a gimmick that brings out its charm

· "Super Dragoon Injection Expanding Gimmick" When Super Dragoon is slid, each mechanism is linked to Super Dragoon Deploy to the injection position.
· "Completely new movable internal skeleton" The golden part expands due to joint movement. An exterior incorporating a slide mechanism PG Strike Gundam further evolved from the internal skeleton, was extra finish processed The golden part is effectively exposed.
· "Installing a new mechanism in the joint" Adopted a new mechanism for each part of the aircraft, which is subject to a heavy burden, such as the waist and legs. Due to the improved joint holding force, You can enjoy the unexpected posing.

● Included: Beam Shield, Beam Rifle × 2, Beam Sabel × 2, Kusufiasu 3 rail gun × 2, Super Dragoon × 8, dedicated base (pedestal)

※ Two LR41 batteries for LED are required separately.

Approx. Packaging Approx. Packaging Dimensionss (cm): 59 x 40 x 17
Weight (g): 3550

Approx. Packaging Dimensions (cm): 39 x 31 x 14
Weight (g): 1570

Approx. Packaging Dimensions (cm): 39 x 31 x 14
Weight (g): 1590

Approx. Packaging Dimensions (cm): 19 x 25 x 4
Weight (g): 130

Approx. Packaging Dimensions (cm): 20 x 2 x 28 Weight (g): 55

Approx. Packaging Dimensions (cm): 19 x 23.5 x 2
Weight (g): 60

This item is an accessory or set of accessories for Gundam models. Perfect for 1/144 scale Gundams! Snap-fit modular assembly. Suitable for 8 years and above.

Approx. Packaging Approx. Packaging Dimensionss (cm): 19 x 24 x 0.5
Weight (g): 78

Approx. Packaging Dimensions (cm): 19 x 28 x 2 Weight (g): 135

Approx. Packaging Dimensions (cm): 8 x 19 x 2
Weight (g): 75

Approx. Packaging Dimensions (cm): 31 x 20 x 13.5
Weight (g): 570